CITYTRAK 7TX HYBRID:
Compact on tracks for non-compromising professionals!

Well established, both nationally and internationally, in compact recycling and natural rock, the CityTrak 7TX hybrid offers the best conditions for reducing coarse material to the desired grain size with low wear.
The CityTrak stands out with its harmonious curved tubular components, extended pre-screen, tumbling valve for discharging fines and many other innovative features.

The CityTrak 7TX crushes stones.

Advantages at a glance

  • Finest crushed grain mixture:
    A 30 mm minimum CSS in a feed opening of 700 x 500 mm is proof of the immense ability to reduce the materials.
  • Problem-free crushing operations:
    Due to the optimal feed design, larger fragments are fed in without any blockages. There is no tapering at the discharge thanks to the 800 mm wide belt.
  • Wheel loader or excavator feed:
    The generously sized, 3.550 mm long hopper can accommodate both of these without any restrictions.
  • DUAL-POWER:
    Diesel-electric drive for use of external power.

Facts

Whether in hard rocks of Scandinavia or recycling applications in Portugal, the CityTrak 7TX hybrid makes an impression due to its simple and robust construction which is based on the CitySkid. After just a few minutes to set-up, just four electrical motors and the hydraulic motor for the track drive are required to take the machine into operation.
The CityTrak 7TX hybrid performs its duties simply and appreciatively. The operator is also appreciative when too large pieces of materials which are to be crushed can be safely fed-in and transported. In case of any problems, the CityTrak 7TX hybrid  offers the best possible access on critical locations.

 

The fact, that the moving jaw and the discharge belt run in the same direction, ensures the optimal discharge of iron and minerals. Additional electricity consumers can be flexibly attached through two sockets. Apart from this, the CityTrak 7TX hybrid can simply be supplied with external electricity as an option. A light barrier crusher control is supplied as standard for cost-saving crushing operations without the need for personnel.

Performance Data

Feed hopper: 3.550 x 2.000 mm
Vibrating feeder: 3.000 x 650 mm
Jaw crusher: 700 x 500 mm
Discharge conveyor width: 800 mm
Discharge height: 2.800 mm
Drive: 88 kVA diesel
unit /electric
Magic Eye: Crusher control

 

Options

  • Over belt magnets
  • Side conveyor
  • Remote control
  • Spray device for dust suppression
  • 2. Platform area

Working-/Transport dimensions

Working length: 9.900 mm
Working width: 2.554 mm
Working height: 3.100 mm
Weight base machine
incl. magnet:
Allowance, side conveyor:

18. 500 kg
550 kg
Transport length: 9.900 mm
Transport width: 2.550 mm
Transport height: 3.100 mm

Conclusion

“Back to the roots'; finally a machine which does what it promises without any technical gimmicks. This machine quickly proves its worth.”

Picture Gallery